Marine Decking Perth Boat Deck Perth WA Stock

Marine decking Perth WA boat deck perth wa marine deck perth wa marine decking perth wa best deck for boats

Comcork Aquadeck

Aquadeck © is an R12 exterior rated anti-slip decking for use on boats, wheelchair ramps, balconies, wharves, jetties, pontoons, walkways, swimming pool surrounds and any exposed wet area. Aquadeck is available in diamond and round profile dots.

 

Aquadeck ©  is also currently employed on some Rottnest ferries, the famous WA pleasure craft "True North", the QLD Police boats, some Sydney Harbour Ferries as well as hundreds of other commercial and pleasure craft throughout Australia.

 

Aquadeck © iis MADE IN AUSTRALIA to very exacting specification to comply with AUSTRALIAN STANDARDS (refer below)

Being 70% cork Aquadeck is non-porous, highly resistant to most common chemicals, oils, acids. 

It is highly RESISTANT TO UV and is HIGHLY WEAR RESISTANT.

 

Technical Data for Aquadeck ©:

Tested for:

SLIP RESISTANCE - AS/NZ 4586

FIRE RETARDENCY - AS/ISO 9239.1

SURFACE FLAMMABILITY FOR SAFETY of LIFE AT SEA - IMO A.653(16)

CHEMICAL RESISTANCE - ASTM F925-96

STAIN RESISTANCE - DIN 51958

ENVIRONMENT - GECA 28-2005

Minimum quantity 1 sheet (1800mm x 900mm x 3.2mm) for stock colours, or 6 sheets for factory colour orders.

Scroll down for more products...

Comcork CLP Low Profile

 

CLP Low Profile © is an R10 rated anti-slip flooring product suitable for a variety of general commercial, marine and residential uses. CLP's material consistency and UV resistance are the same as Aquadeck © (see above) and so can withstand the rigours of exterior exposure.

CLP Low Profile © is also popular for use on pleasure craft too as compared to Aquadeck, CLP's soft round dot profile makes it easier when kneeling or for children crawling around a deck, where the anti-slip requirements are less strenuous than commercial use.

With colours that closely match Aquadeck a combination of CLP and Aquadeck can be considered.

 

CLP Low Profile © is currently employed on boats in use by Cockburn Marine Rescue, Swan River Trust, and hundreds of other commercial and pleasure craft throughout Australia.

 

CLP Low Profile © is MADE IN AUSTRALIA to very exacting specification to comply with AUSTRALIAN STANDARDS (refer below)

Being 70% cork Comcork CLP is non-porous, highly resistant to most common chemicals, oils, acids. 

It is highly RESISTANT TO UV and is HIGHLY WEAR RESISTANT.

 

Technical Data for CLP Low Profile ©:

Tested for:

SLIP RESISTANCE - AS/NZ 4586

FIRE RETARDENCY - AS/ISO 9239.1

SURFACE FLAMMABILITY FOR SAFETY of LIFE AT SEA - IMO A.653(16)

CHEMICAL RESISTANCE - ASTM F925-96

STAIN RESISTANCE - DIN 51958

ENVIRONMENT - GECA 28-2005

Minimum quantity 1 sheet (1800mm x 900mm x 3.2mm) for stock colours, or 6 sheets for factory colour orders.

Marine decking Perth WA boat deck perth wa marine deck perth wa marine decking perth wa best deck for boats
Scroll down for more products...
Marine decking Perth WA boat deck perth wa marine deck perth wa marine decking perth wa best deck for boats

Comcork Sports

 

Comcork Sports © is an R10 rated anti-slip flooring product. Comcork Sports' © material consistency and UV resistance are the same as Aquadeck © (see above) and so can withstand the rigours of exterior exposure.

Comcork Sports' © is used expensively in gymnasiums and sports centres but it's 'orange peel' profile is a popular choice for pleasure craft too. With colours that closely match Aquadeck a combination of Comcork Sports © and Aquadeck can be considered.

 

Comcork Sports © is MADE IN AUSTRALIA to very exacting specification to comply with AUSTRALIAN STANDARDS (refer below)

Being 70% cork Comcork Sports is non-porous, highly resistant to most common chemicals, oils, acids. 

It is highly RESISTANT TO UV and is HIGHLY WEAR RESISTANT.

 

Technical Data for Comcork Sports ©:

Tested for:

SLIP RESISTANCE - AS/NZ 4586

FIRE RETARDENCY - AS/ISO 9239.1

SURFACE FLAMMABILITY FOR SAFETY of LIFE AT SEA - IMO A.653(16)

CHEMICAL RESISTANCE - ASTM F925-96

STAIN RESISTANCE - DIN 51958

ENVIRONMENT - GECA 28-2005

Minimum quantity 1 sheet (1800mm x 900mm x 3.2mm) for stock colours, or 6 sheets for factory colour orders.